Vesta LED Flashing Markers.

Vesta flashing LED markers have been developed to illuminate potential trip hazards, projecting objects, walk ways and escape routes in low ambient light conditions.

Vesta requires no external electrical connection and feature simple and rapid attachment to walls, floors, cables and hoses. No maintenance is required with this low cost LED device that is simply discarded and replaced after the battery life has expired, minimum of 12 months operational use. Simply remove the magnet within the packaging to activate the flashing Vesta. 


A higher light intensity version is available, full details can be found on the Marl website (Click on the Marl Logo above),  under Filament Replacement LEDs.

Lens.

Fixing the Vesta.

2 x M4 screws through the mounting slots.
2 x plastic cable ties, as photograph.
Double sided sticky tape on base of unit.

Housing.

4.1 Mounting Slot.

All Dimensions in Millimetres.

  • A compact, robust, transparent nylon housing, completely potted.
  • Operational supply by integral batteries, no external power required.
  • Low current consumption.  5 to 20mA, range of illumination levels.
  • Portable equipment, minimum 12 months continuous LED flashing.
  • Operating / Storage temperature range:   -30 to +65 degrees C.
  • Batteries contain no lead and requires no environmental concerns.
  • Zone 0 intrinsically safe units available for hazardous applications.
  • Chemical Resistant.
    •